Our notice boards and travel pin maps are designed to be securely wall mounted and are supplied with appropriate fixings depending on the size of the product.
- Smaller sizes are supplied with picture hanger fixings
- Larger sizes are supplied with mirror plate fixings, which require drilling into the wall using screws and rawl plugs
- Spring lock fixings are also available for an additional charge
- Wall protectors are supplied with all notice boards and maps to help protect your wall and keep the frame level
You will find pilot holes on the back of the frame for both portrait and landscape hanging, allowing you to install your notice board in the orientation that best suits your space.
Picture Hanger Fixings (Smaller Notice Boards)
- Attach the picture hanger
Attach one picture hanger to the back of the frame using the enclosed brass screws. Pilot holes are provided on the back of the frame for both portrait and landscape hanging. - Apply wall protectors
Stick the wall protectors to the bottom two corners on the back of the frame. - Install the picture hook
Attach the enclosed picture hook to the wall in the desired position using a hammer and the pins provided. - Hang the notice board
Place the notice board onto the wall so that the bottom edge of the picture hanger sits securely on the picture hook.
Your notice board is now ready to use.
Mirror Plate Fixings (Larger Notice Boards)
- Apply wall protectors
Stick the wall protectors to each corner on the back of the frame. - Attach mirror plates to the frame
Secure the mirror plates to the back of the frame using the enclosed brass screws. Pilot holes are provided for both portrait and landscape hanging. When attaching the plates, ensure that the raised lip faces outward towards you. - Position the notice board
Hold the notice board in position on the wall where you would like it to hang. For larger notice boards, two people may be required. - Mark drill holes
Using a spirit level, mark the drill holes at the left-hand and right-hand sides of the frame. - Drill wall holes Set the notice board aside and drill the two holes. Insert rawl plugs (not supplied).
- Secure the notice board to the wall
Place the notice board back in position and insert appropriate screws (not supplied) through the mirror plates and into the wall.
Your notice board is now securely installed and ready to use.
Additional Notes
- Always ensure you use appropriate screws and wall fixings for your wall type.
- Larger notice boards may require two people for safe installation.
- If you have any questions about installation, please feel free to contact us for guidance.
